Multiple Lift Rigging Training Video

RETURN to the Products List page.

CLICK HERE to order this item.

Format: VHS or DVD:
Program Length: 26 minutes
Available: English or Spanish
Includes Bilingual Instructor’s Guide

The Multiple Lift Rigging training module defines OSHA 1926.761 (c)(1) of the 2002 steel erection standard. The information was developed with training guidelines established by the American National Standards Institute (ANSI Z490.1-2001). Every effort has been made to provide training documentation and information that meets the needs of employers for compliance purposes, as well as providing realistic approaches to implementation on the jobsite.

This program is accompanied by a Bilingual Instructor’s Guide to assist in the classroom setting, with preplanning checklist, Discussion Topics, and Post Viewing Knowledge check. Program outline:

1. Defining the new Subpart R OSHA Standard
2. Identifying Multi-lift Hazards on the jobsite
   1. Crushing or amputation injuries on the ground
   2. Rigging failure during hoisting
   3. Power lines
   4. Crane hand signals
3. Multi-lift Systems; their requirements, installation maintenance, inspection and removal
   1. Rigging equipment: wire rope slings, hooks & shackles
   2. Clean lay-down area
   3. Storage/staging
   4. Specially designed Multi-lift rigging devices
   5. Cribbing
   6. Personal protective equipment
4. Proper Procedures for Multi-lift Rigging
   1. Proper planning with beam list
   2. Determining load capacity
   3. Determining weight of a member
   4. Proper crane hand signals
   5. Safety rules for Multi-lift rigging
   6. Maximum of 5 members Seven foot rule
      1. Maximum of 5 members Seven foot rule
      2. Wind limits safe route member restrictions
      3. Crane requirements
   7. Marking centerlines
   8. Use of tag line