|
News
|
|
|
Stop Use & Recall Notice IMMEDIATE ACTION REQUIRED 3M™ DBI-SALA® Twin-Leg Nano-Lok™ edge and Twin-Leg Nano-Lok™ Wrap Back Self-Retracting Lifelines
Twin-Leg Nano-Lok™ edge and Twin-Leg Nano-Lok™ Wrap Back Models 3M Fall Protection announces an immediate stop use and product recall of the 3M™ DBI-SALA® Twin-Leg Nano-Lok™ edge and the Twin-Leg Nano-Lok™ Wrap Back Self-Retracting Lifeline. These Twin-Leg Nano-Loks are used as part of a personal fall protection system that connects two self-retracting lifelines/devices (SRLs/SRDs) directly under the dorsal D-ring of a worker’s harness. The Twin-Leg Nano-Lok edge is intended to be anchored at foot-level, is designed for sharp and/or leading edge applications and incorporates an energy absorber. The Twin-Leg Nano-Lok Wrap Back is intended for wrapping around an anchor and incorporates a similar energy absorber. 3M has determined that in a fall and under certain conditions, the energy absorber of these devices may not properly deploy which could expose the worker to serious injury or death. There have been no reports of accidents or injuries associated with this issue, these products must be removed from service immediately. ClickTo address this situation, in the interests of worker safety, 3M is launching a global stop use of the Twin-Leg Nano-Lok edge and Twin-Leg Nano-Lok Wrap Back SRL devices. 3M is recalling all these devices to be repaired or replaced as soon as a solution is identified, tested and certified. Alternatively, end-users may elect to receive cash for their returned devices as described below. This stop use/recall affects all models of the Twin-Leg Nano-Lok edge and Twin-Leg Wrap Back SRLs since first introduced in 2013. This stop use/recall does not affect the single-leg versions of these models. As of the date of this notice, no 3M twin-leg SRL product is approved for use over sharp or abrasive edges.
Users/Owners: Immediately stop using your Twin-Leg Nano-Lok edge and Twin-Leg Nano-Lok Wrap Back SRL and take these devices out of service. Next, please go to www.NanoLokEdgeRecall.com and follow the instructions on how to return your device. As soon as a product solution is available, 3M will either repair or replace your device and return it to you at 3M’s expense. Alternatively, and only until a repair or replacement solution is available, you can return your device and elect to receive cash in the amount of $400 USD if your device was manufactured after January 1, 2017, or $200 USD if your device was manufactured before January 1, 2017. The manufacture year/month is printed on the back label of the device. Distributors: Please contact our Customer Service department at 1-833-638-2697 or email us at 3musfpserviceaction@mmm.com to obtain a listing of all Twin-Leg Nano-Lok edge and Twin-Leg Wrap Back SRLs sold to you. If you have any of these devices in stock, please return them to 3M Fall Protection for credit at 3M’s expense. Please immediately forward this Notice to any of your customers/users who have purchased Twin-Leg Nano-Lok edge and Twin-Leg Nano-Lok Wrap Back SRLs from you with an urgent request that they read and comply with this Notice. Please contact 3M Customer Service for assistance, additional recall information, or alternative solutions at 1-833-638-2697 or 3musfpserviceaction@mmm.com. We sincerely apologize for any inconvenience that this situation may cause to you or your customers. July 25th, 2019 3M Fall Protection 3833 SALA Way Red Wing, MN 55066 Comments are closed.
|
RSS Feed
